PST60-690-70T

Product ID:72855
Updated: 2026/4/3
ABB PST60-690-70T

Key Features

  • 1Achieve precise motor start and stop timing. 2、Control torque to reduce water hammer in pumps. 3、Protect motors with dual overload and underload features. 4、Enable communication via Profibus, Modbus, Devicenet, CANopen. 5、Save energy with a compact, built-in bypass contactor design.
Product Details
PST60-690-70T
ABB

Technical Specifications

Detailed engineering parameters

ParameterValueParameterValue
Product Net Width
160 mm
Product Net Height
260 mm
Product Net Depth / Length
196 mm
Product Net Weight
5 kg
Rated Operational Voltage
Main Circuit 400 ... 690 V AC
Rated Control Supply Voltage (Us)
100 ... 250 V AC
Rated Control Circuit Voltage (Uc)
DC Operation 24 V
Rated Frequency (f)
50/60 Hz Main Circuit 50 / 60 Hz
Rated Operational Power - In-Line Connection (Pe)
(400 V) 30 kW (500 V) 37 kW (690 V) 55 kW
Rated Operational Current - In-Line Connection (Ie)
60 A
Rated Operational Power - Inside Delta Connection
at 400 V 55 kW at 500 V 75 kW at 690 V 90 kW
Rated Operational Current - Inside Delta Connection
105 A
Service Factor Percentage
115 %
Overload Protection
Build-in electronic overload protection
Integrated Electronic Overload
Yes
Adjustable Rated Motor Current Ie
30 ... 115 %
Starting Capacity at Maximum Rated Current Ie
3xIe for 15s
Ramp Time
0 ... 120 second [unit of time] 1 ... 120 second [unit of time]
Initial Voltage During Start
30 ... 70 %
Step Down Voltage Special Ramp
100 ... 30 %
Current Limit Function
1.5 ... 7xIe
Switch for Inside Delta Connection
Yes
Run Signal Relay
Yes
By-pass Signal Relay
Yes
Fault Signal Relay
Yes
Overload Signal Relay
Yes
Analog Outputs
0…10 volts 0…20 mA 4…20 mA
Signal Indication Ready to Start/Standby ON (LED)
Green
Signal Indication Protection (LED)
Yellow
Signal Indication Fault (LED)
Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time
30
Communication
FiledBusPlug(Standard)
Degree of Protection
acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP10
Terminal Type
Screw Terminals
Connecting Capacity Main Circuit
Rigid 1 x 10 ... 95 mm² Rigid 2 x 6 ... 35 mm²
Connecting Capacity Control Circuit
Rigid 1 x 2.5 mm² Rigid 2 x 1.5 mm²
Connecting Capacity Supply Circuit
Rigid 1 x 2.5 mm²
Tightening Torque
Control Circuit 0.5 N·m Main Circuit 6 N·m Supply Circuit 0.5 N·m
Product Main Type
PST60
Ambient Air Temperature
Operation 0 ... +50 °C Storage -25 ... +70 °C
Object Classification Code
Q
ETIM 7
EC000640 - Soft starter
ETIM 8
EC000640 - Soft starter
ETIM 9
EC000640 - Soft starter
eClass
V11.0 : 27370907
Manufacturer ID
1SFA895006R7020

Specifications may be subject to change without notice