advul-100- -p-a-s6
Product ID:3023
Updated: 2026/7/7
Key Features
- 1Achieve versatile automation with a 1 mm to 400 mm stroke range.
- 2Reduce wear using elastic cushioning rings at both ends.
- 3Enable precise forward/backward motion via double-acting operation.
- 4Handle 0.06-1 MPa pressure with a 100 mm piston.
- 5Operate reliably from 0°C to 120°C with ISO-standard air.
Need a quote? Enter your quantity and get pricing fast.
Qty
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Stroke | 1mm 400mm | Piston diameter | 100 mm |
| Cushioning | Elastic cushioning rings/pads at both ends | Mounting position | Any |
| Structural design | Piston Piston rod | Position sensing | For proximity sensor |
| Symbol | 00991737 | Variants | Heat-resistant seals max. 120°C |
| Protection against torsion/guide | Guide rod with yoke | Operating pressure | 1bar 10bar |
| Mode of operation | Double-acting | Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) | Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | Ambient temperature | 0°C 120°C |
| Impact energy in the end positions | 1J | Theoretical force at 6 bar, retracting | 4418N |
| Theoretical force at 6 bar, advancing | 4712N | Type of mounting | Optionally: With through-hole With accessories |
| Pneumatic connection | G1/4 | Flange screws material | Steel, galvanized |
| Cover material | Wrought aluminum alloy | Material of dynamic seals | FPM |
| Piston rod material | High-alloy steel | Material of cylinder barrel | Wrought aluminum alloy |
| Manufacturer ID | 156219 |
Specifications may be subject to change without notice
Still deciding on advul-100- -p-a-s6?
Our engineers can confirm stock, price, and lead time for this Festo part.
Get a no-obligation quote in 1 minute.