advulq-40- -p-a
Product ID:2939
Updated: 2026/4/3
Key Features
- 1Maximize space efficiency with a compact design ideal for constrained layouts. 2、Reduce wear using flexible cushioning rings at both ends for smooth operation. 3、Ensure precise control with integrated proximity sensors for accurate position detection. 4、Select from multiple variants including internal or external thread piston rods. 5、Benefit from CRC 2 corrosion resistance for moderate protection in harsh environments.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Stroke | 1mm 300mm | Piston diameter | 40 mm |
| Cushioning | Elastic cushioning rings/pads at both ends | Mounting position | Any |
| Mode of operation | Double-acting | Piston rod end | Internal thread |
| Structural design | Piston Piston rod | Position sensing | For proximity sensor |
| Symbol | 00991217 | Variants | Piston rod at one end |
| Protection against torsion/guide | Square piston rod | Operating pressure | 14.5psi 145psi |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] | Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress | LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20°C 80°C | Impact energy in the end positions | 0.52J |
| Theoretical force at 6 bar, retracting | 686N | Theoretical force at 6 bar, advancing | 754N |
| Moving mass at 0?mm stroke | 63g | Additional moving mass per 10?mm stroke | 9g |
| Basic weight with 0?mm stroke | 433g | Additional weight per 10?mm stroke | 59g |
| Type of mounting | Optionally: With through-hole With accessories | Pneumatic connection | G1/8 |
| Flange screws material | Steel, galvanized | Cover material | Wrought aluminum alloy |
| Material of dynamic seals | NBR TPE-U(PU) | Piston rod material | High-alloy steel |
| Material of cylinder barrel | Wrought aluminum alloy | Manufacturer ID | 156105 |
Specifications may be subject to change without notice