aen-5/8"- -
Product ID:12608
Updated: 2026/4/4
Key Features
- 1Ensure smooth operation with elastic cushioning rings for durability. 2、Meet ISO 21287 standards for reliability and consistency. 3、Integrate proximity switches for flexible mounting options. 4、Handle pressures from 0.1 to 1 MPa for various applications. 5、Resist moderate corrosion with CRC 2 compliance for longevity.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Stroke | 0.9906mm 24.9936mm | Piston diameter | 5/8" |
| Based on norm | ISO 21287 | Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any | Mode of operation | Single-acting |
| Structural design | Piston Piston rod Profile barrel | Position sensing | For proximity sensor |
| Variants | Extended external thread piston rod Extended piston rod With anti-twist protection Heat-resistant seals max. 120°C Piston rod at one end | Protection against torsion/guide | Square piston rod |
| Operating pressure | 14.5psi 145psi | Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) | Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | Ambient temperature | -20°C 120°C |
| Impact energy in the end positions | 0.04067J | Theoretical force at 6 bar, advancing | 121.001N |
| Type of mounting | Optionally: With through-hole With internal thread With accessories | Pneumatic connection | 10-32 UNF-2B |
| Flange screws material | Steel | Cover material | Wrought aluminum alloy, anodized |
| Piston rod material | High-alloy steel | Material of cylinder barrel | Wrought aluminum alloy, smooth-anodized |
| Manufacturer ID | 557189 |
Specifications may be subject to change without notice