aevuz-32-25-p-a
Product ID:3797
Updated: 2026/4/4
Key Features
- 1Achieve precise pulling with a 25mm stroke and 32mm piston diameter. 2、Reduce wear using elastic cushioning rings at both ends. 3、Operate reliably from 0.08 to 1 MPa (0.8-10 bar). 4、Save energy with single-acting pulling operation design. 5、Meet ISO 8573-1:2010 standards for air quality compliance.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Stroke | 25mm | Piston diameter | 32 mm |
| Cushioning | Elastic cushioning rings/pads at both ends | Mounting position | Any |
| Mode of operation | Single-acting Pulling | Piston rod end | Internal thread |
| Structural design | Piston Piston rod | Position sensing | For proximity sensor |
| Symbol | 00991204 | Variants | Piston rod at one end |
| Operating pressure | 11.6psi 145psi | Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) | Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | Ambient temperature | -20°C 80°C |
| Impact energy in the end positions | 0.4J | Theoretical force at 6 bar, advancing | 382N |
| Moving mass at 0?mm stroke | 49g | Additional moving mass per 10?mm stroke | 9g |
| Basic weight with 0?mm stroke | 300g | Additional weight per 10?mm stroke | 40g |
| Type of mounting | Optionally: With through-hole With accessories | Pneumatic connection | G1/8 |
| Flange screws material | Steel, galvanized | Cover material | Wrought aluminum alloy |
| Material of dynamic seals | NBR TPE-U(PU) | Piston rod material | High-alloy stainless steel |
| Material of cylinder barrel | Wrought aluminum alloy | Manufacturer ID | 157230 |
Specifications may be subject to change without notice