DGST-25- -
Product ID:515512
Updated: 2026/5/29
Key Features
- No key features available for this product.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Piston rod material | High-alloy stainless steel | Housing material | Wrought aluminium alloy |
| Guide material | POM / TPE-E / High-alloy steel | Seal material | HNBR |
| Cover material | Wrought aluminium alloy | Material note | RoHS compliant |
| Pneumatic connection | G1/8 | Mounting type | With through holes |
| Product weight | 1463 / 5076 g | Moving mass | 714 / 2418.5 g |
| Theoretical force at 6 bar, forward stroke | 589 N | Theoretical force at 6 bar, return stroke | 495 N |
| Max. torque Mz | 11 / 21 Nm | Max. torque My | 11 / 21 Nm |
| Max. torque Mx | 12 / 20 Nm | Max. force Fz | 1030 / 1840 N |
| Max. force Fy | 1030 / 1840 N | Cushioning length | 1.2 / 10 mm |
| Impact energy at end positions | 0.3 / 6 J | Ambient temperature | -10 / 60 °C |
| Cleanroom suitability according to ISO 14644-14 | Class 6, in accordance with ISO 14644-1 | Suitable for lithium-ion battery production | Suitable for battery production with reduced copper/zinc/nickel values (F1a) |
| Paint-wetting impairment substance (PWIS) conformity | VDMA24364-B1/B2-L | Corrosion resistance class CRC | 1 - Low corrosion resistance |
| Note on operating and pilot medium | Can be operated with lubricated medium (subsequently must always be operated with lubricated medium) | Operating medium | Compressed air in accordance with ISO 8573-1:2010 [7:4:4] |
| Operating mode | Double-acting | Repeatability | <= 0.3 mm / <= 0.02 mm |
| Max. speed | 0.5 / 0.8 m/s | Operating pressure | 14.5 / 116 psi |
| Variant | Metals with copper, zinc, or nickel as the main component are not used. Exceptions: nickel in steel, electroless nickel-plated surfaces, printed circuit boards, cables, electrical connectors, and coils. | Symbol | 00991249 |
| Position detection | Via proximity switch | Design feature | Fork / Piston rod / Slide |
| Guide | Caged ball bearing guide | Mounting position | Any |
| Cushioning | With short elastic cushioning rings/pads at both ends / Elastic cushioning, both sides, non-adjustable stroke / With elastic cushioning rings/pads at both ends / With elastic cushioning pads at both ends, with fixed stop / Internal hydraulic cushioning pad | Operating mode, drive unit | Connecting plate |
| Piston diameter | 25 mm | Adjustable end position range/length, rear | 6.3 / 45.4 mm |
| Adjustable end position range/length, front | 5.95 / 47 mm | Stroke | 10 / 200 mm |
Specifications may be subject to change without notice