dpzj-10-10-p-a-kf-s2
Product ID:4233
Updated: 2026/4/3
Key Features
- 1Deliver high thrust forces up to 100 N at 6 bar for demanding tasks. 2、Adjust the stroke within a 10 mm range for precise control. 3、Feature CRC2 corrosion resistance for moderate indoor protection. 4、Include elastic cushioning rings for smooth operation and reduced wear. 5、Mount horizontally from above, below, or the side for flexible installation.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Stroke | 10mm | Adjustable end position range/length | 10mm |
| Piston diameter | 10 mm | Drive unit operating mode | Yoke |
| Cushioning | Elastic cushioning rings/pads at both ends | Mounting position | Any |
| Guide | Recirculating ball bearing guide | Structural design | Guide |
| Position sensing | For proximity sensor | Symbol | 00991243 |
| Variants | Through piston rod | Operating pressure | 2.5bar 10bar |
| Max. speed | 1m/s | Mode of operation | Double-acting |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] | Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 0 - No corrosion stress | LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20°C 80°C | Impact energy in the end positions | 0.08J |
| Theoretical force at 6 bar, retracting | 60N | Theoretical force at 6 bar, advancing | 60N |
| Alternative connections | See product drawing | Pneumatic connection | M5 |
| Cover material | Wrought aluminum alloy | Seals material | NBR |
| Housing material | Wrought aluminum alloy | Piston rod material | Case-hardened steel |
| Manufacturer ID | 162016 |
Specifications may be subject to change without notice