dsl-40-100-270-p-a-s20-kf-b
Product ID:12462
Updated: 2026/4/4
Key Features
- 1Adjust from 0 to 270 degrees for precise motion control. 2、Enable simultaneous extension and retraction for efficient operation. 3、Ensure smooth motion with minimal backlash and high accuracy. 4、Provide lasting protection against torque and guide wear. 5、Meet ISO 8573-1:2010 for reliable environmental performance.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Adjustment range of swivel angle | 0deg 270deg | Stroke | 100mm |
| Piston diameter | 40 mm | Swivel angle | 0deg 272deg |
| Cushioning | Elastic cushioning rings/pads at both ends | Mounting position | Any |
| Precision adjustment | -6deg | Mode of operation | Double-acting |
| Structural design | Rotary vane | Position sensing | For proximity sensor |
| Symbol | 00991269 | Variants | Through, hollow piston rod |
| Protection against torsion/guide | Guided on ball bearings | Operating pressure | 2.5bar 8bar |
| Max. impact velocity | 0.5m/s | Max. swivel frequency at 6?bar | 2Hz |
| Swivel angle backlash | 0.05deg | Repetition accuracy | 1deg |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] | Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress | LABS (PWIS) conformity | VDMA24364-B2-L |
| Ambient temperature | -10°C 60°C | Dynamic load torque | 5.4Nm |
| Theoretical force at 6 bar, retracting | 495N | Theoretical force at 6 bar, advancing | 603N |
| Theoretical torque at 6 bar | 20Nm | Permissible mass moment of inertia | 2.4E-4kgm2 |
| Product weight | 5200g | Basic weight with 0?mm stroke | 5200g |
| Additional weight per 10?mm stroke | 175g | Type of mounting | Optionally: Clamped in T slot With external thread |
| Pneumatic connection | G1/8 | Cover material | Wrought aluminum alloy Anodized |
| Seals material | TPE-U(PU) | Housing material | Aluminum Smooth anodized |
| Piston rod material | Tempered steel | Manufacturer ID | 556753 |
Specifications may be subject to change without notice