DSNU-63- -
Product ID:512743
Updated: 2026/5/29
Key Features
- No key features available for this product.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Cylinder barrel material | High-alloy stainless steel | Piston rod material | High-alloy stainless steel |
| Seal material | NBR / TPE-U(PU) | End cap material | High-alloy stainless steel |
| Material note | RoHS compliant | Pneumatic connection | G3/8 |
| Mounting type | With accessories | Additional weight per 10 m stroke | 44 g |
| Basic weight at 0 mm stroke | 1445 g | Additional moving mass per 10 mm stroke | 25 g |
| Moving mass at 0 mm stroke | 459 g | Theoretical force at 6 bar, forward stroke | 1870 N |
| Theoretical force at 6 bar, return stroke | 1682 N | Cushioning length | 21 mm |
| Impact energy at end positions | 0.65 / 1.3 J | Ambient temperature | -20 / 120 °C |
| Paint-wetting impairment substances (PWIS) conformity | VDMA24364-B1/B2-L / VDMA24364 Zone III | Corrosion resistance class CRC | 2 - Medium corrosion resistance / 3 - High corrosion resistance |
| Operating and pilot medium notes | Can be operated with lubricated medium (must then always be operated with lubricated medium) | Operating medium | Compressed air in accordance with ISO 8573-1:2010 [7:4:4] |
| Explosion protection ambient temperature | -20°C <= Ta <= +60°C | Dust explosion protection type | Ex h IIIC T120°C Db |
| Gas explosion protection type | Ex h IIC T4 Gb | ATEX dust category | II 2D |
| ATEX gas category | II 2G | Explosion protection | Zone 1 (ATEX) / Zone 1 (UKEX) / Zone 2 (ATEX) / Zone 21 (ATEX) / Zone 21 (UKEX) / Zone 22 (ATEX) |
| Explosion protection certification outside the EU | EPL Db (GB) / EPL Gb (GB) | CE marking (see declaration of conformity) | In accordance with UK EX Directive |
| CE certification (see declaration of conformity) | In accordance with EU Explosives Directive (ATEX) | Operating mode | Double acting |
| Operating pressure | 1 / 10 bar | Torque/guide protection | Square piston rod |
| Variant | Extended stroke adjustment / Welding spatter resistant / Custom thread on piston rod / Piston rod with external hexagon / Additional slide, standard, left / Low friction, suitable for balancing hoist applications / Bearing end cap without mounting thread / Swivel ball joint mounted on end cap / Metal scraper / Module for reaching a specific end position in the event of pressure failure / Increased lateral load / High corrosion resistance class / Reinforced piston rod / Constant slow speed motion / Low friction / Hollow piston rod at both ends / Additional PTFE piston guide | Position detection | Via proximity switch |
| Design feature | Cylinder diameter / Piston rod / Cylinder barrel | Mounting position | Any |
| Cushioning | Elastic cushioning rings/buffers at both ends / Self-adjusting pneumatic end-position cushioning / Pneumatic cushioning, adjustable at both ends | Piston diameter | 63 mm |
| Stroke | 1 / 500 mm |
Specifications may be subject to change without notice