esbf-bs-40-100-5p
Product ID:15018
Updated: 2026/4/3
Key Features
- 1Achieve ±0.01 mm repetition accuracy for reliable operation. 2、Utilize a 100mm stroke and 5mm spindle pitch for precise motion. 3、Benefit from robust construction with stainless steel and aluminum. 4、Install flexibly with female thread or accessory mounts. 5、Receive free lifetime technical support and shipping.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Size | 40 | Stroke | 100mm |
| Piston rod thread | M12x1.25 | Reversing backlash | 30μm |
| Screw diameter | 16mm | Spindle pitch | 5mm/U |
| Max. angle of rotation of the piston rod +/- | 0.2deg | Based on norm | ISO 15552 |
| Mounting position | Any | Piston rod end | External thread |
| Motor type | Stepper motor Servo motor | Position sensing | For proximity sensor |
| Structural design | Electric actuator with ball screw | Spindle type | Ball screw |
| Symbol | 00991941 | Protection against torsion/guide | With plain-bearing guide |
| Max. acceleration | 5m/s2 | Max. speed | 0.42m/s |
| Repetition accuracy | ±0.01 mm | Duty cycle | 100% |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress | LABS (PWIS) conformity | VDMA24364 zone III |
| Storage temperature | -20°C 60°C | For use in the food industry | See supplementary material information |
| Relative air humidity | 0 - 95 % | Degree of protection | IP40 |
| Ambient temperature | 0°C 60°C | Max. driving torque | 3Nm |
| Max. radial force on actuator shaft | 130N | Max. feed force Fx | 3000N |
| No-load driving torque | 0.2Nm | Guide value for payload, horizontal | 300kg |
| Guide value for payload, vertical | 300kg | Mass moment of inertia JH per meter of stroke | 0.4601kgcm2 |
| Mass moment of inertia JL per kg of payload | 0.0063kgcm2 | Mass moment of inertia JO | 0.0504kgcm2 |
| Moving mass at 0?mm stroke | 467g | Additional moving mass per 10?mm stroke | 26g |
| Basic weight with 0?mm stroke | 1237g | Additional weight per 10?mm stroke | 47g |
| Type of mounting | With internal thread or accessory | Interface code, actuator | D40 |
| Note on materials | RoHS-compliant | Cover material | Wrought aluminum alloy, smooth-anodized |
| Piston rod material | High-alloy stainless steel | Material of screws | Steel, galvanized |
| Spindle nut material | Roller bearing steel | Spindle material | Roller bearing steel |
| Material of cylinder barrel | Wrought aluminum alloy, smooth-anodized | Manufacturer ID | 8022574 |
Specifications may be subject to change without notice