Key Features
- 1Operating mode: Double acting
- 2Piston diameter: 10 mm
- 3Stroke: 10 mm
- 4Theoretical force at 6 bar, forward stroke: 45 N
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Gate valve material | Surface-hardened steel | Push rod material | High-alloy steel |
| Piston rod material | High-alloy steel | Housing material | Smooth anodised wrought aluminium alloy |
| Seal material | NBR | Cover material | High-alloy steel |
| Material note | RoHS compliant | Pneumatic connection | M5 |
| Mounting type | Through holes for M3 screws and locating sleeves / With M4 internal thread and locating sleeves | Spare interface | M3 |
| Maximum mass per external jaw | 56 g | Product weight | 90 g |
| Theoretical force at 6 bar, forward stroke | 45 N | Theoretical force at 6 bar, return stroke | 35 N |
| Maximum torque My on jaws, static | 3 Nm | Maximum torque at jaw Mx, static | 3 Nm |
| Maximum torque Mr on jaws, static | 3 Nm | Maximum force Fz on jaws, static | 75 N |
| Maximum tightening torque | 1.2 Nm for M3 / 2.9 Nm for M4 | Ambient temperature | 5 / 60 °C |
| Degree of protection | IP40 | Paint-wetting impairment substances (PWIS) conformity | VDMA24364-B2-L |
| Corrosion resistance class CRC | 2 - Moderate corrosion resistance | Note on operating and pilot medium | Can be operated with lubricated medium (must then continue to be operated with lubricated medium) |
| Operating medium | Compressed air in accordance with ISO 8573-1:2010 [7:4:4] | Repeat accuracy | 0.05 mm |
| Return stroke time | 30 / 60 ms | Advance time | 30 / 60 ms |
| Operating pressure | 3 / 8 bar | Protruding part of proximity switch | 14 / 22 mm |
| Minimum product distance determined by proximity switch | 30 / 50 mm | Torque/guide protection | Square rail |
| Symbol | 00991216 | Position detection | Via proximity switch |
| Design feature | Piston rod / Non-rotating | Operating mode | Double acting |
| Mounting position | Optional | Cushioning | No cushioning |
| Mounting of external jaws | Through holes | Maximum angular jaw gripper play az | 0.262 deg |
| Maximum angular jaw gripper play ay | 0.2 deg | Maximum play of swivel jaw gripper ax | 0.12 deg |
| Maximum rod clearance Sz | 0.03 mm | Maximum rod clearance Sx | 0.05 mm |
| Maximum repeat accuracy | 0.3 mm | Piston diameter | 10 mm |
| Stroke | 10 mm |
Specifications may be subject to change without notice