mfh-3-1/8-120-ex
Product ID:10722
Updated: 2026/4/3
Key Features
- 1Control precisely with this 3/2-way monostable electric solenoid valve. 2、Achieve 500 l/min flow using ISO 8573-1:2010 compressed air. 3、Operate on 120V AC with fast 29 ms off and 11 ms on switching. 4、Deploy safely in hazardous areas with explosion-proof and IP65 ratings. 5、Simplify installation using the detenting manual override and soft mounts.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Valve function | 3/2, closed, monostable | Actuation type | Electrical |
| Width | 70.5mm | Standard nominal flow rate | 500l/min |
| Pneumatic working port | G1/8 | Operating voltage | 120V AC |
| Operating pressure | 1.5bar 8bar | Reset method | Mechanical spring |
| Explosion protection certification outside the EU | Class I, Div. 1 (US) Class I, Div. 2 (US) Class II, Div. 1 (US) Class II, Div. 2 (US) Class III, Div. 1 (US) Class III, Div. 2 (US) EPL Gb (US) EPL Gc (US) | Certificate issuing authority | FM 3026030 |
| Degree of protection | IP65 | Nominal width | 5mm |
| Exhaust air function | With flow control option | Sealing principle | Soft |
| Mounting position | Any | Manual override | Detenting |
| Type of control | Pilot-controlled | Flow direction | Non-reversible |
| Symbol | 00991008 | Lap | Underlap |
| Switching time off | 29ms | On switching time | 11ms |
| Coil characteristics | 120 V AC: 60 Hz, initial power 11.5 VA, holding power 6.5 VA | Explosion prevention and protection | Class I, Div. 1 (US) Class I, Div. 2 (US) Class II, Div. 1 (US) Class II, Div. 2 (US) Class III, Div. 1 (US) Class III, Div. 2 (US) Zone 1 (US) Zone 2 (US) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] | Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress | Temperature of medium | -5°C 40°C |
| Ambient temperature | -5°C 40°C | Product weight | 355g |
| Type of mounting | With through-hole | Venting hole connection | Internal |
| Pilot exhaust air port 82 | M5 | Pneumatic connection 1 | G1/8 |
| Pneumatic connection 2 | G1/8 | Pneumatic connection 3 | G1/8 |
| Seals material | NBR PU | Housing material | Die-cast aluminum Anodized |
| Manufacturer ID | 541651 |
Specifications may be subject to change without notice