vzwd-l-m22c-m-n14-25-v-2ap4-8
Product ID:1784
Updated: 2026/4/3
Key Features
- 1Handle demanding pressures up to 50 bar reliably. 2、Utilize a corrosion-resistant brass housing for longevity. 3、Operate efficiently with 24V DC for lower energy costs. 4、Integrate seamlessly into Festo's automation component ecosystem. 5、Achieve precise fluid control with direct actuation.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Structural design | Directly controlled poppet valve | Actuation type | Electrical |
| Sealing principle | Soft | Mounting position | Any |
| Type of mounting | Line installation | Fitting connection | 1/4 NPT |
| Electrical connection | Form A Plug as per EN 175301-803 Rectangular design | Nominal width | 2.5mm |
| Valve function | 2/2, closed, monostable | Manual override | None |
| Flow direction | Non-reversible | Medium | Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas Mineral oil Water Neutral liquids Other flow media on request |
| Nominal pressure of fitting PN | 50 | Pressure difference | 0psi |
| Differential pressure | 0bar | Coil characteristics | 110 V AC: 50/60 Hz, initial power 10.5 VA, holding power 8.0 VA |
| Insulation class | F | Permissible voltage fluctuations | +/- 10 % |
| Duty cycle | 100% | Reset method | Mechanical spring |
| Type of control | Direct | Symbol | 00992979 |
| Medium pressure | 0psi 116psi | Max. viscosity | 22mm2/s |
| Temperature of medium | -10°C 80°C | Ambient temperature | -10°C 35°C |
| Leak rate to EN 12266-1 | A | Flow rate Kv | 0.16m3/h |
| Standard nominal flow rate | 170l/min | On switching time | 25ms |
| Switching time off | 10ms | Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364 zone III | Housing material | Brass |
| Material number of housing | CW614N | Seals material | FPM |
| Product weight | 350g | CE marking (see declaration of conformity) | As per EU low voltage directive |
| UKCA marking (see declaration of conformity) | To UK instructions for electrical equipment | Degree of protection | IP65 |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress | Manufacturer ID | 1491948 |
Specifications may be subject to change without notice