140DDM69000C
Product ID:28952
Updated: 2026/4/3
Key Features
- 1Handle up to 156.2 V DC with minimal current draw. 2、Process mixed signals with 4 discrete inputs and 4 outputs. 3、Protect circuits with transient suppression and 5A fuses. 4、Ensure safety via 1780 Vrms I/O isolation. 5、Monitor status easily with multiple LED indicators.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Range of Product | Modicon Quantum automation platform | Product or Component Type | Mixed discrete I/O module |
| Discrete I/O number | 8 | Discrete input number | 4 1 group of 8 |
| Discrete input logic | Sink | Addressing requirement | 1 output word<br />1 input word |
| Network frequency limits | 47…63 Hz | Discrete input voltage | 125 V DC |
| input voltage limits | 156.2 V including ripple | Voltage state 0 guaranteed | 0...36 V |
| Voltage state 1 guaranteed | 88...156.2 V | Current state 0 guaranteed | <= 1.2 mA |
| Current state 1 guaranteed | >= 2 mA | Response time | 0.5 or 1.5 ms depending on the filter at state 0 to state 1<br />0.5 or 1.5 ms depending on the filter at state 1 to state 0 |
| Discrete output number | 4 1 group of 4 | Discrete output type | Solid state, isolated |
| Discrete output logic | Source or sink | Discrete output voltage | 24...125 V |
| Output voltage limits | 19.2...156.2 V DC typical | Maximum load current | <= 16 A per module<br /><= 4 A per point |
| Maximum voltage drop | <0.75 V 4 A | Absolute maximum output | 30 A during 500 ms per point |
| Maximum load capacitance | 0.1 µF 150 V DC<br />0.6 µF 24 V DC | Maximum leakage current | 1.2 mA 150 V DC |
| Protection Type | On input by resistor limited<br />On output by transient voltage suppression<br />Internal output protection by 5 A fuse per group | Associated fuse rating | 5 A |
| Isolation between group of I/O channels | 1780 Vrms for 1 minute | Isolation between group and bus | 2500 Vrms for 1 minute |
| Isolation between channels | 1780 Vrms for 1 minute | Fault indication | Overcurrent on output |
| Power dissipation | 0.4 W + (1 x input point on) + (0.75 total output load current) | Local signalling | for bus communication is present (Active) 1 LED (green)<br /> for no voltage in output and input (F) 1 LED (red)<br /> for fault detected on the output point 2 LEDs (red)<br /> for output is turned on 4 LEDs (green)<br /> for fault detected on the input point 4 LEDs (red) |
| marking | CE | Bus current requirement | 350 mA |
| Net Weight | 0.7 lb(US) (0.3 kg) | Resistance to electrostatic discharge | 4 kV contact IEC 801-2<br />8 kV on air IEC 801-2 |
| Resistance to electromagnetic fields | 9.1 V/m (10 V/m) 80…1000 MHz IEC 801-3 | Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
| Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) | Relative Humidity | 95 % without condensation |
| Operating altitude | <= 16404.2 ft (5000 m) | Protective treatment | Conformal coating Humiseal 1A33 |
| Standards | FM Class 1 Division 2<br />UL 508<br />CSA C22.2 No 142 | Product Certifications | cUL |
Specifications may be subject to change without notice