BMXAMO0410
Product ID:29540
Updated: 2026/4/3
Key Features
- 1Deliver precise control with 4 isolated analog outputs and 15-bit resolution. 2、Ensure operational safety via isolation between channels, ground, and bus. 3、Monitor system status instantly with comprehensive RUN, diagnostic, ERR, and I/O LEDs. 4、Simplify installation by drawing power directly from the internal rack supply. 5、Achieve rapid signal processing with conversion times of ≤1 ms per channel.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Range of Product | Modicon X80 | Product or Component Type | Analog output module |
| Electrical connection | 20 ways 1 connector | Isolation between channels | Isolated |
| Measurement error | <= 0.2 % of full scale 0...60 °C<br />0.1 % of full scale 25 °C | Temperature drift | 45 ppm/°C +/- 10 V<br />45 ppm/°C 0...20 mA<br />45 ppm/°C 4...20 mA |
| Minimum crosstalk attenuation | 80 dB | Common mode rejection | 100 dB |
| Isolation voltage | 1400 V DC between channels and ground<br />1400 V DC between channels and bus<br />750 V DC between channels | Detection type | Open circuit 0...20 mA<br />Open circuit 4...20 mA<br />Short circuit +/- 10 V |
| Load impedance ohmic | >= 1000 Ohm +/- 10 V<br /><= 500 Ohm 0...20 mA<br /><= 500 Ohm 4...20 mA | Output level | High level |
| Analogue output number | 4 | Analogue output type | Current 0...20 mA<br />Current 4...20 mA<br />Voltage +/- 10 V |
| Analogue output resolution | 15 bits + sign | Supply | Internal power supply via rack |
| Conversion time | <= 1 ms | Maximum conversion value | 0...21 mA 0...20 mA<br />0...21 mA 4...20 mA<br />+/- 10.5 V +/- 10 V |
| Fallback mode | Configurable<br />Predefined | MTBF reliability | 1000000 H |
| Operating altitude | 0...6561.68 ft (0...2000 m)<br />2000...5000 m with derating factor | Status LED | 1 LED (Green) RUN<br />1 LED per channel (Green) channel diagnostic<br />1 LED (Red) ERR<br />1 LED (Red) I/O |
| Net Weight | 0.33 lb(US) (0.15 kg) | Power consumption in W | 3 W 24 V DC typical<br />3.6 W 24 V DC maximum<br />0.45 W 3.3 V DC typical<br />0.51 W 3.3 V DC maximum |
| Current consumption | 150 mA 3.3 V DC<br />140 mA 24 V DC | Vibration resistance | 3 gn |
| Shock resistance | 30 gn | Ambient Air Temperature for Storage | -40…185 °F (-40…85 °C) |
| Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) | Relative humidity | 5…95 % 131 °F (55 °C) without condensation |
| IP Degree of Protection | IP20 | Directives | 2014/35/EU - low voltage directive<br />2014/30/EU - electromagnetic compatibility |
| Product Certifications | CE<br />RCM<br />CSA<br />EAC<br />Merchant Navy<br />UL | Standards | EN/IEC 61010-2-201<br />EN/IEC 61131-2<br />UL 61010-2-201<br />CSA C22.2 No 61010-2-201 |
Specifications may be subject to change without notice