TM5SDM8DTS
Product ID:34169
Updated: 2026/4/4
Key Features
- 1Configure flexible and scalable remote I/O islands. 2、Achieve high-performance automation with 4 discrete I/O. 3、Install easily with a compact, single-wire DIN rail design. 4、Ensure safety with 1500V AC channel-to-bus isolation. 5、Meet global standards with GOST, cULus, CE, CSA certifications.
Technical Specifications
Detailed engineering parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Range of Product | Modicon TM5 | Product or Component Type | Discrete I/O module |
| Discrete input number | 4 | Discrete input voltage | 24 V |
| Discrete output number | 4 | Discrete output type | Transistor |
| Range Compatibility | PacDrive LMC motion controller | Product Compatibility | PacDrive LMC Pro 2<br />PacDrive LMC Pro<br />PacDrive LMC Eco |
| Discrete input voltage type | DC | input voltage limits | 20.4...28.8 V |
| Discrete input logic | Sink | Discrete input current | 1.3 mA |
| input impedance | 18.4 kOhm | Output voltage | 24 V DC |
| Output voltage limits | 20.4...28.8 V | Discrete output logic | Source |
| Current per channel | 0.1 A | Maximum current per output common | 0.4 A |
| Color | White | Peak output current | 0.4 A |
| Switching frequency | <= 16 kHz resistive | Input filtering | >= 2 µs hardware |
| Response time | <= 2 µs from state 0 to state 1 output<br /><= 2 µs from state 1 to state 0 output | Maximum leakage current | 25 µA when switched off |
| Protection Type | Overload protection<br />Short-circuit protection<br />Inductive overvoltage | Isolation | No insulation between channels<br />500 Vrms AC insulation between channel and bus |
| Maximum voltage drop | <0.9 V at 0.1 A output | Maximum supply current for sensors | 600 mA |
| Current consumption | 2 mA 5 V DC bus<br />62.5 mA 24 V DC input/output | Maximum power dissipation in W | 1.51 W |
| Local signalling | 1 LED green power supply<br />1 LED red power supply<br />8 LEDs input/output status | Electrical connection | 1 wire |
| Net Weight | 0.055 lb(US) (0.025 kg) | Standards | UL 508<br />CSA C22.2 No 142<br />IEC 61131-2 |
| Product Certifications | EAC<br />cULus<br />CE<br />C-tick | Ambient air temperature for operation | 14…140 °F (-10…60 °C) with derating factor horizontal installation)<br />14…122 °F (-10…50 °C) with derating factor vertical installation) |
| Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) | Relative Humidity | 5…95 % without condensation |
| IP degree of protection | IP20IEC 60529 | Pollution degree | 2 IEC 61131-2 |
| Operating altitude | 0...6561.68 ft (0...2000 m) | Storage altitude | 0.0000000000…9842.5 ft (0…3000 m) |
| Vibration resistance | 1 gn 8.4…150 Hz DIN rail<br />3.5 mm 5…8.4 Hz DIN rail | Shock resistance | 15 gn 11 ms |
| Electromagnetic compatibility | Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2<br />Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2<br />Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3<br />Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4<br />Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4<br />1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5<br />1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5<br />Conducted RF disturbances IEC 61000-4-6<br />Conducted and radiated emissions CISPR 11 |
Specifications may be subject to change without notice